| Use Fence
|
Enabled when there is an active fence, spaces are
selected according to the Fence selection mode, when on.
- Fence Mode
- Inside: only
the spaces completely inside the fence are selected.
- Overlap: only
the spaces inside or overlapping the fence are selected.
- Void: only the
spaces completely outside the fence are selected.
- Void-Overlap:
only the spaces outside or overlapping the fence are selected.
|
| Use Active Level and Symbology
|
When on, selected spaces update with the active
user defined symbology set in the Attributes toolbox. When off, updated spaces
retain the symbology definitions that existed before the update operation was
initiated.
|
| Allow Holes Larger Than
|
When on, the holes defined by closed regions and
shapes within the space boundary have no effect in the space area when on. The
minimum recognizable size of the hole is specified in the setting field.
|
| Make Space Associative
|
This setting creates an associative space and the
definition is automatically modified and updated when associated elements (such
as walls) are modified and updated when on.
|
| Allow Flooded Spaces
|
This flood option recognizes the outline of a space
boundary when on. When off, space boundaries are ignored and spaces are flooded
over. This setting is particularly useful when recognizing areas between space
definitions, such as hallways and areas consumed by traffic and egress. It is
also useful for recognizing total space used when creating program areas for
schematic massing.
|
Used to recalculate the
area and perimeter of spaces that are selected individually or with a fence.
Spaces created prior to version 8.5.3 are also updated to the datagroup
annotation format.
